ARTPRESSO DESiGN

BRAND COLLECTIONS

Espresso Accessories Designed and Produced for Coffee Brands

Artpresso designs and makes the barista tools and espresso accessories that carry a brand onto a counter. The work runs from first concept through industrial design, engineering, prototyping, tooling, manufacturing management and packaging, and it ends with a finished product a brand can put its name on.

The brand brings the identity and the audience. Artpresso brings the product: what it is made of, how it is made, how it feels in use, and how it reaches the people who will use it. The collections below were designed for La Marzocco, BIGFACE, Mahlkönig and Breville.

Discuss a Collection
  • La Marzocco coffee tamper holders in walnut, black and white, designed by Artpresso Design
    StudioTamper holders, across the finish range
  • Design rendering detail of the La Marzocco tamper holder edge with the la marzocco wordmark
    ConceptTamper holder, edge detail
  • La Marzocco black coffee tamper and distributor being used on a portafilter
    In useTamper and distributor over the portafilter
  • Design rendering of the La Marzocco portafilter with a pale turned handle
    ConceptPortafilter
  • La Marzocco white knock box with cleaning brush and milk pitchers
    StudioKnock box, brush and pitchers
  • Design rendering of the La Marzocco walnut and stainless knock box with its knock bar
    ConceptKnock box, walnut and stainless
  • Hands holding the La Marzocco double wall dosing cup fitted to a portafilter
    In useDouble wall dosing cup on the portafilter
  • Design rendering of the walnut La Marzocco dosing cup with its lid open and the stainless interior showing
    ConceptDosing cup, lid open
  • Design rendering of two stainless La Marzocco milk pitchers in different sizes
    ConceptMilk pitchers, two sizes

La Marzocco

A full barista accessory range developed with La Marzocco and sold under their name.

Tampers, distributors, tamper holders, knock boxes, brushes and pitchers. Finishes are drawn from the machines the pieces sit beside — walnut, stainless, powder-coated black and white — so the range reads as one family on the counter.

See La Marzocco
  • White BIGFACE espresso tamper being lowered onto a portafilter of ground coffee
    In useTamper, lowered onto the dose
  • Design rendering of the black BIGFACE espresso tamper and matching puck screen
    ConceptTamper and puck screen
  • Black BIGFACE cupping spoon held above a white BIGFACE mug
    In useCupping spoon and mug
  • Design rendering of the black BIGFACE cupping bowl with its matching cupping spoon
    ConceptCupping bowl and spoon
  • Espresso pouring into the BIGFACE glass shot pitcher under the group head
    In useEspresso into the glass shot pitcher
  • Design rendering of the black BIGFACE pour over dripper with the BIGFACE face logo
    ConceptPour-over dripper
  • White BIGFACE coffee distributor held above a portafilter of ground coffee
    In useDistributor, over the dose
  • Design rendering of the BIGFACE glass shot pitcher with measurement markings and the BIGFACE face logo
    ConceptGlass shot pitcher
  • Black BIGFACE milk pitcher held at the espresso machine
    In useMilk pitcher at the machine
  • Design rendering of the black BIGFACE milk pitcher with the CAUTION CONTAINS SMILEMATTER engraving
    ConceptMilk pitcher engraving
  • Engraving detail on the black BIGFACE milk pitcher
    DetailEngraving on the milk pitcher

BIGFACE

Accessories built around a brand identity rather than adapted to one.

A co-branded line for Jimmy Butler’s BIGFACE Coffee — milk pitcher, distributor, tamper, shot glass and cupping spoon, designed as a single set, not five separate objects.

See the BIGFACE machines
  • Mahlkönig grinder on a dark counter with the walnut dosing tray, portafilter, distribution tool, brush and tamper
    In useThe grinder with the walnut set
  • Design rendering of the Mahlkönig tampers and cleaning brushes in light maple and walnut
    ConceptTampers and brushes, both finishes
  • Walnut Mahlkönig tamper, brush, distribution tool and dosing tray on a dark counter beside the grinder
    In useTamper, brush and dosing tray
  • Design rendering of the Mahlkönig tamper shown in light maple and in walnut
    ConceptThe tamper, light and walnut
  • Overhead view of a hand brushing the portafilter on the maple Mahlkönig dosing tray
    In useBrushing down the dosing tray
  • Design rendering detail of the stainless top of the Mahlkönig tamper with the Mahlkönig crown logo
    ConceptTamper top and logo
  • Black Mahlkrone grinder wrench being used on a Mahlkönig EK43 burr carrier
    In useMahlkrone, black finish, on the burr carrier
  • Design rendering of the Mahlkönig glass dosing vessel with wooden lid, beside the brush and tamper
    ConceptDosing vessel, brush and tamper
  • Hand using the maple Mahlkönig distribution tool on a dosed portafilter, with the brush and dosing cup on a live edge walnut board
    In useDistribution tool over the dose
  • Design rendering of the Mahlkönig glass dosing vessel with the tamper seated on its wooden lid
    ConceptDosing vessel with the tamper seated
  • Hand lifting the engraved walnut Mahlkönig hopper lid off the glass bean hopper
    In useLifting the walnut hopper lid
  • Design rendering of the Mahlkönig grinder portafilter forks above the walnut dosing tray
    ConceptGrinder forks and walnut dosing tray

Mahlkönig

An accessory line in maple and walnut, designed and produced under the Mahlkönig name.

Tampers, distribution tools, grinder trays and hopper covers, each turned in maple or walnut and collared in stainless. The Mahlkrone grinder wrench, shaped to seat on the EK43 burr carrier, came out of the same programme.

See the Mahlkrone
  • Walnut handled portafilter fitted to a Breville espresso machine
    In useWalnut portafilter on a Breville machine
  • Design rendering of a walnut and stainless espresso accessory group for Breville machines
    ConceptTamper, dosing cup, distributor and portafilter
  • Breville espresso machine with Artpresso walnut and stainless accessories
    StudioAccessories fitted to the Breville range
  • Top view design rendering of a turned walnut dosing cup for Breville machines
    ConceptDosing cup, top view

Breville

An accessory line designed for Breville’s home espresso machines.

Portafilters, tampers, distributors and hopper lids in walnut and stainless, made to the machines’ own proportions so nothing about them looks aftermarket. Part of the line was customised for Lance Hedrick, giving those pieces an identity of his own alongside the machine’s.

See the Lance Hedrick collection

Start a Collection

If you have a brand and an idea for the objects that carry it, we can take it from first concept to a delivered product.

Tell us about the brand, the pieces you have in mind and the timeline, and we will come back with a route through design, engineering, tooling and production.

Tell us about the brand